Insulin Syringe Printing and Assembly Machine

تعرفه تبلیغاتتعرفه تبلیغات
The packaging container was torn off by the automatic powder

How to solve the Syringe Blister Packaging of the automatic powder packaging machine 1. When the automatic powder packaging machine is operating, there is a large deviation in the cutting position of the bag, and the gap between the color code is too large, the color code positioning fails, and the photoelectric tracking compensation is out of control. In this case, you can first try to re-adjust the position of the photoelectric switch. If it fails, clean the former, insert the packaging material into the lead plate, and adjust the position of the paper guide so that the light spot coincides with the middle of the color code. 2.

The packaging container was to off by the automatic powder packaging machine during the operation. Once this happens, check the motor circuit to see if the proximity switch is damaged. 3. During the packaging process, the paper feed motor of the automatic powder packaging machine is stuck and does not rotate or rotates out of control. It is also a very common fault. First check whether the paper feed lever is stuck, whether the starting capacitor is damaged, and whether the fuse is out. Problems, and then replace them according to the inspection results. 4. The packaging container is not tightly sealed.

This phenomenon will not only waste materials, but also because the materials are all powders, they are easy to spread and pollute the equipment and workshop environment of the automatic powder packaging machine. With this situation, it is necessary to check whether the packaging container meets the relevant regulations, remove the fake and inferior packaging container, and then try to adjust the sealing pressure and increase the heat sealing temperature. 5.

The automatic powder packaging machine does not pull the bag, and the pull bag motor is off the chain. The cause of this failure is nothing more than a line problem. The bag pull proximity switch is damaged, the controller is malfunctioning, and the stepper motor driver is faulty. Check them one by one. replace. Advantages of automatic powder packaging machine 1. High speed of powder packaging machine: adopt screw feeding and light control technology; 2.

برچسب‌ها : Syringe Blister Packaging,
Power the equipment 30 minutes before work every day

With the continuous medical needle loader development, there are many types of automatic granule packaging machines produced in China, and their functions, configurations and technologies are not very different. So how to choose an automatic granule packaging machine suitable for enterprise automated production? In fact, no matter which equipment you choose, the first comparison is quality and after-sales service. Product quality is directly related to the effectiveness of product packaging. How to increase the service life of the equipment after purchase? Automatic pellet packaging machine maintenance: 1.

Power the equipment 30 minutes before work every day for preheating, and there is no need to tu off the power supply of the control cabinet during the continuous production season. 2. Before operating and debugging the packaging machine, users must be technically trained and familiar with the performance and operating methods of the packaging system. 3.

Ensure that the packaging machinery and equipment are clean, remove dust and oil, remove dust and viscous substances accumulated in the electronic scale cavity and filling cylinder, do not wash with water, and the door to dry the electronic scale and display control panel should be closed tightly. 4. On the other hand, do not hit the product with hammers, steel rods or hard and sharp objects, otherwise it will cause sparks and serious safety problems.

On the other hand, the product is mainly a stainless steel thin-walled structure with inner and outer surfaces. After polishing, knocking is easily deformed, changing the shape of the wall and increasing the roughness of the wall, which increases the resistance to material flow and forms a retaining or sticky wall. If stagnation or blockage occurs, please be careful not to scratch the blade of the screw feeder when dredging with a wooden stick, shaking it gently with a rubber hammer or poking it down. 5.

Regularly check the integrity of the automatic particle packaging machine and ensure that the bolts and nuts (especially the sensor fixing parts) are not loose. Ensure that moving parts (such as bearings and sprockets) run smoothly. If abnormal noise occurs, check and repair it immediately.

برچسب‌ها : medical needle loader,